Loading... Please wait...

Hotline (24/7): 0912358787

Nhận thông tin từ chúng tôi


Cisco Catalyst 3850-48T-S - Switch - L3 - Managed - 48 x 10/100/1000

  • Cisco Catalyst 3850-48T-S - Switch - L3 - Managed - 48 x 10/100/1000 - desktop, rack-mountable
Price:
Vui lòng liên hệ số 0462755269/ 090.444.90.70
Part#:
WS-C3850-48T-S
Hãng sản xuất:
Bookmark and Share


Mô tả sản phẩm

The Cisco Catalyst 3850 series is the enterprise-class stackable access-layer switches that provide full convergence between wired and wireless on a single platform. Cisco's Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC) powers the switch and enables uniform wired-wireless policy enforcement, application visibility, flexibility and application optimization.

  • Converged wired plus wireless access
  • Flexible NetFlow (FNF)
  • Advanced wired plus wireless QoS capabilities
  • Provides a rich set of security features
  • Converged wired plus wireless access
    The Cisco Catalyst 3850 is the first stackable access switching platform that enables wired plus wireless services on a single Cisco IOS XE software-based platform. With this, Cisco has pioneered a host of rich capabilities such as high availability based on stateful switchover (SSO) on stacking, granular QoS, security, and Flexible Netflow (FNF) across wired and wireless in a seamless fashion.
  • Flexible NetFlow (FNF)
    Full visibility into the wired plus wireless traffic is achieved because of the access point Control and Provisioning of Wireless Access Points (CAPWAP) tunnel termination on the switch. This helps identify users and user traffic flows in order to identify potential attackers and take corrective action at the access layer before the attack penetrates further into the network. This is achieved using FNF, which monitors every single flow entering and exiting the switch stack for wired and wireless users. It also helps identify the top wired/wireless talkers and enforce appropriate bandwidth provisioning policies.
  • Advanced wired plus wireless QoS capabilities
    The 3850 switch has advanced wired plus wireless QoS capabilities. It uses the Cisco modular QoS command line interface (MQC). The switch manages wireless bandwidth using unprecedented hierarchical bandwidth management starting at the per-access-point level and drilling further down to per-radio, per-service set identification (SSID), and per-user levels. This helps manage and prioritize available bandwidth between various radios and various SSIDs (enterprise, guest, and so on) within each radio on a percentage basis. The switch is also capable of automatically allocating equal bandwidth among the connected users within a given SSID.
  • Provides a rich set of security features
    The Cisco Catalyst 3850 provides a rich set of security features for wired plus wireless users. Features such as IEEE 802.1x, Dynamic Host Configuration Protocol (DHCP) snooping, IP Source Guard and control plane protection, wireless intrusion prevention systems (WIPSs), and so on enable protection against unauthorized users and attackers. With a variety of wired plus wireless users connecting to the network, the switch supports session-aware networking, in which each device connected to the network is identified as one session, and unique access control lists (ACLs) and/or QoS policies can be defined and applied using the ISE for each of these sessions, providing better control on the devices connecting to the network.
  • Product Description: Cisco Catalyst 3850-48T-S - switch - 48 ports - Managed - desktop, rack-mountable
  • Device Type: Switch - 48 ports - L3 - Managed - stackable
  • Enclosure Type: Desktop, rack-mountable 1U
  • Interfaces: Gigabit Ethernet
  • Ports: 48 x 10/100/1000
  • Performance: Switching capacity : 176 Gbps ¦ Stacking bandwidth : 480 Gbps
  • Capacity: IPv4 routes : 24000 ¦ NetFlow entries : 48000 ¦ Switched virtual interfaces (SVIs) : 1000
  • MAC Address Table Size: 32000 entries
  • Jumbo Frame Support: 9198
  • Routing Protocol: RIP-1, RIP-2, EIGRP, RIPng
  • Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, SSH, CLI
  • Features: Auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, IPv6 support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), STP Root Guard, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4 support, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), layer 3 load balancing, Energy Efficient Ethernet, Cisco StackWise-480 technology, Cisco StackPower technology, Flexible NetFlow (FNF)
  • Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
  • Power: AC 120/230 V ( 50/60 Hz )
  • Power Redundancy: Optional
  • Dimensions (WxDxH): 44.5 cm x 45 cm x 4.45 cm
  • Weight: 7.7 kg
  • Manufacturer Warranty: Limited lifetime warranty

·         Product Description: Cisco Catalyst 3850-48T-S - switch - 48 ports - Managed - desktop, rack-mountable

·         Device Type: Switch - 48 ports - L3 - Managed - stackable

·         Enclosure Type: Desktop, rack-mountable 1U

·         Interfaces: Gigabit Ethernet

·         Ports: 48 x 10/100/1000

·         Performance: Switching capacity : 176 Gbps ¦ Stacking bandwidth : 480 Gbps

·         Capacity: IPv4 routes : 24000 ¦ NetFlow entries : 48000 ¦ Switched virtual interfaces (SVIs) : 1000

·         MAC Address Table Size: 32000 entries

·         Jumbo Frame Support: 9198

·         Routing Protocol: RIP-1, RIP-2, EIGRP, RIPng

·         Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, SSH, CLI

·         Features: Auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, IPv6 support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), STP Root Guard, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4 support, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), layer 3 load balancing, Energy Efficient Ethernet, Cisco StackWise-480 technology, Cisco StackPower technology, Flexible NetFlow (FNF)

·         Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s

·         Power: AC 120/230 V ( 50/60 Hz )

·         Power Redundancy: Optional

·         Dimensions (WxDxH): 44.5 cm x 45 cm x 4.45 cm

·         Weight: 7.7 kg

·         Manufacturer Warranty: Limited lifetime warranty

 


Tìm sản phẩm tương tự trong danh mục